Power to Preserve: Creating a Collection Care Culture: AIC’s Collection Care Network Hosts a Session at the American Alliance of Museums Annual Meeting

–By Marianne Weldon, Objects Conservator and Collections Manager of the Art and Artifacts Collection, Bryn Mawr College
On Sunday, May 29, I attended the panel entitled Power to Preserve: Creating a Collection Care Culture moderated by Rebecca Fifield.  This session was developed by AIC’s Collection Care Network (CCN) for the Collection Management track at the Annual Meeting of the American Alliance of Museums in Washington, D.C.  The AAM Annual Meeting Theme for 2016 was Power, Influence, and Responsibility, encouraging exploration of “how the themes of power, influence and responsibility shape the work of museums in the U.S. and around the world”.
A goal of the presentation was to share influencing strategies to support development of collection care, as well as to highlight resources and partnerships available through AIC. The three presenters spoke of ways that they have been working at their institutions to foster relationships with partners within and outside their institution to better enable them to care for their collections.
 Maryanne McCubbin spoke to fostering aligned goals across an institution.  She emphasized the importance in finding common ground among museum staff and that most people working in the museum are collections stewards in some way whether directly or indirectly.  She outlined the importance of fostering that relationship with others that work in the museum in a variety of ways including:

  • Avoiding rhetoric and demystifying what collections staff are doing. Avoid terms that people won’t understand, such as agents of deterioration.
  • Being proactive and available so people don’t feel like they are bothering you or that you are too busy for them.
  • Provide frequent, regular, repeated communications on many levels and in many directions up and down the chain.
  • Make sure to demonstrate that you have the “big picture” in mind and that you understand and present things in an inter-disciplinary way.

Kathy Garrett-Cox spoke to the importance of working with community partners to enable smaller institutions to create a collection care culture beyond their institutions.  At Maymont, an American estate in Richmond Virginia, the staff numbers 3 full-time and 3 part-time, which is small when considering the needs of institutions during emergency response.  Garrett-Cox spoke about the formation of The Museum Emergency Support Team (MEST), which was formed by a group of small local organization in 2006 in response to Hurricane Katrina as an alliance for response to help to share resources, planning and training.  She additionally outlined many specific examples of the way the group grew and changed over the years, introducing challenges associated with volunteer group continuity, what worked, and what didn’t.
Patricia Silence works at Colonial Williamsburg Foundation where she manages the preventive conservation team of 20 members.  She gave numerous examples of ways that demonstrated the power of communication strategies to strengthen staff partnerships in supporting collection care. Overall, these ideas helped create relationships where colleagues in other departments wanted to help further collection care. These strategies included:

  • Meeting with over 150 site interpreters and supervisors in small groups and explaining the reasons for temperature set points. This included a briefing on dew point and how they use temperature to reduce the possibility of having water in the walls. This has helped their facilities department get fewer calls regarding comfort issues.
  • Tracking the number of hours spent cleaning gum off of items and cleaning up soda spills in order to explain why these items should not be allowed in historic buildings with collections.
  • She emphasized the importance of expressing professional “needs and desires” in terms of value. Giving reasons beyond collections value when necessary and aligning the rationale with the goals of colleagues in other departments.

Additionally Patricia spoke of areas for improvement, where things haven’t gone as well as she would like.  One specific example was in the area of excessive lighting, where additional buy-in by leadership and security staff is still needed.
As a result of all the panelists discussing both things that worked well and areas that needed improvement, discussion with the audience then centered around how we respond to hearing “NO” at our institutions and what are the most compelling arguments to win institutional support for preservation programs.  Several  members of the audience responded with ways that they build partnerships with allies within their institution or develop data to support their argument before again attempting to implement change.
The panelists presented a variety of examples, both successful and unsuccessful, to promote collection care cultures at their institutions. It contributed renewed energy to go back to our institutions to continue to forge stronger relationships to support collections care in a variety of creative ways.
Find out more information about the activities of AIC’s Collection Care Network.
 
SPEAKER BIOS:
Rebecca Fifield is Head of Collection Management for the Special Collections at the New York Public Library. She is a graduate of the George Washington University Museum Studies program and a Professional Associate of the American Institute for Conservation. A 25-year veteran of large and small art and history institutions, she is Chair of AIC’s Collection Care Network and an Advisory Council Member of the Association of Registrars and Collections Specialists.
Maryanne McCubbin is Head, Strategic Collection Management at Museum Victoria. Maryanne has worked in archives and museums for close to thirty years. An expert in history and care of heritage collections, her work has centered on the development, care and preservation, use and interpretation of collections. Her current position involves addressing the big, tough issues around managing a major, complex state collection.
Patty Silence is Director of Preventive Conservation at the Colonial Williamsburg Foundation, responsible for preservation in the historic area, museums, storage, and loans. Her focus is on site maintenance, environmental management, emergency preparedness, exhibit preparation, pest control, and safe transport of collections. Patty has over 30 years of experience in encouraging colleagues to gain and use expertise in collections care.Kathy Garrett-Cox is Collection Manager of the Preservation Society of Newport County, Rhode Island and formerly Manager of Historic Collections at Maymont in Richmond, Virginia, where she worked for 11 years. She currently serves as President of the Virginia Conservation Association and as Chair of the Richmond Area Museum Emergency Support Team. Kathy speaks frequently on coordination of conservation projects and writing disaster plans. She recently coordinated the Central Virginia Alliance for Response program.

Conservator Position at Ah-Tah-Thi-Ki Museum

Announcing a full time Conservation position at the Seminole Tribe of Florida’s Ah-Tah-Thi-Ki Museum.  Interested persons should send resume and cover letter to:
Tara Backhouse
Collections Manager
Ah-Tah-Thi-Ki Museum
tarabackhouse<-a t->semtribe< . >com
http://www.ahtahthiki.com
The Conservator reports to the Collections Manager and is responsible for all aspects of conservation treatment for the STOF Ah-Tah-Thi-Ki Museum’s permanent collections.  This position also coordinates and manages the conservation program for the Museum’s collections and exhibitions.  This is a full-time position.  Only US Citizens and Permanent Residents are eligible to apply.
Illustrative Tasks: The listed duties are only illustrative and are not intended to describe every function that may be performed by this position.  The omission of specific statements does not preclude management from assigning specific duties not listed, if such duties are a logical assignment to the position.

  • Administrates a conservation program designed to meet the conservation/preservation needs of STOF Ah-Tah-Thi-Ki Museum’s permanent collections.
  • Coordinates collections care with the Collections Manager and Registrar.
  • Plans, implements and reviews care of Museum collections.
  • Monitors conditions of works in storage, exhibition, and transit environments.
  • Advises Museum staff and the public on the care of permanent collections.
  • Manages in-house conservation laboratory.  Responsible for the selection of appropriate conservation supplies, tools, and equipment; maintenance of tools/equipment and establishment of quality control procedures to verify the adherence of products to standards.
  • Evaluates and improves efficiencies of workflow while ensuring accepted conservation-sound practices and safe lab protocols.
  • Works with exhibition staff in preparing exhibits to ensure proper environment for objects.
  • Performs other related duties as assigned.

Knowledge, Skills and Abilities
Experience in a wide range of conservation treatment procedures.  The museum is willing to consider conservators with various specialties including paper, objects, paintings, or textiles.

  • Excellent computer skills utilizing Microsoft software programs and add-ins.
  • Ability to communicate in English both orally and in writing.
  • Excellent organizational skills and ability to multi-task.
  • Skill in examining and assessing condition of artifacts or works of art; establishing and maintaining optimum environmental conditions; use of laboratory equipment.
  • Ability to determine and perform techniques required for preservation and/or restoration of objects.
  • Strong interpersonal skills.
  • Strong communication skills and ability to maintain effective working relationships.
  • Capable of handling multiple projects and able to see projects to a point of completion.
  • Ability to serve the Tribal community, the public and fellow employees with honesty and integrity.
  • Ability to establish and maintain effective working relationships with the STOF tribal community, general public, co-workers and members of diverse cultural and linguistic backgrounds.
  • Ability to work a flexible work schedule including evenings, weekends and holidays.
  • Ability to travel as necessary.

Minimum Requirements: Bachelor’s degree required.  Master’s degree required in art conservation, or related field.  A minimum of two years of experience/training as a conservator in a museum or similar  facility.
Physical Demands: Typically, the incumbent may sit comfortably to do the work; there may be occasional walking, standing, bending, carrying of light items, such as books, papers; may drive a company vehicle.  No special physical demands are required to perform the work.  Certain conditions utilizing various chemicals needed for conservation work will exist.
 

Sustainability Committee: Call for Professional Member

AIC Sustainability Committee Seeks New Professional Member
Term: October 2016 – May 2018
The Sustainability Committee seeks a new professional member to join our dynamic, interdisciplinary team. The position is open to interim year members, Associates, PAs, and Fellows from any conservation specialty.
Committee goals:

  • Provide resources for AIC members and other caretakers of cultural heritage regarding environmentally sustainable approaches to preventive care and other aspects of conservation practice. Resources may be provided via electronic media, workshops, publications and presentations.
  • Define research topics and suggest working groups as needed to explore sustainable conservation practices and new technologies.

Membership Parameters:

  • The committee is comprised of 8 voting members.
  • Members serve for two years, with an additional two-year term option.
  • One member is a conservation graduate student.
  • One member serves as chair for two years.
  • During the second year of the chair’s term, another member serves as chair designate, assisting with and learning the chair’s responsibilities.
  • As needed, corresponding (non-voting) members and non-AIC experts will be invited to guide research on special topics.

Tasks:

  • Monthly telephone conference calls with the committee members.
  • Research, write and edit the AIC Wiki Sustainability pages.
  • Participate in researching and writing group presentations, publications, blog posts, and social media posts.
  • Contribute to development and planning for the Sustainability Session at the AIC Annual Meeting.
  • Initiate and support committee projects to increase awareness of sustainable practices in the conservation community.
  • Collaborate with related committees, networks, and working groups.

To Apply:
Please submit a statement of purpose (1 page maximum length) and resume by September 21, 2016 to Melissa Tedone, Committee Chair, at mtedon@winterthur.org.
 

44th Annual Meeting, Photographic Materials Session, May 17, 2016, "Methods for Cleaning Brass Mats from Cased Photographs" by Christophe Vischi, Ariane Lalande, John McElhone and Chloé Lucas

Christophe Vischi and Ariane Lalande presented a talk on practical tests they conducted to determine how to clean brass mats of photographs from the collection of the Colby Curtis Museum, Stanstead, Quebec. These mats suffered from multiple corroded spots (which I know as pitting corrosion from industry), containing stable Cu2O cuprite and active atacamite Cu2Cl(OH)3. They compared two electrochemical methods and the use of an ion exchange resin to treat the mats:
– spot electrolysis using an EDTA electrolyte and at 9 Volts,
– brushing an glycerine electrolyte on the object, wrapping it in aluminum foil and laying it a humid chamber
– use of the ion exchange resin, Amberlite IR 120 HM. This comes in the form of beads, which were applied locally on the object as a poultice using a fine brush.
The authors did not obtain good results with the electrochemical methods, with staining being a problem for the spot electrolysis, and a gray patina a result of the wrapping method. They chose the method using the ion exchange resin. It was found that grinding the beads before application improved the results. Very local cleaning was possible, and the solution could be rinsed off with a mixture of ethanol and water. Still, there were flecks left where the pitting corrosion was, but these could be retouched to match the finish. Care had to be taken to avoid staining uncorroded areas. The result appeared to be satisfactory, and they want to continue work on optimizing this method.
I would like to note that electrochemical methods should not be ruled out based on this paper. When performed properly, electrochemical cleaning can be used to clean most metals found in museums. C. Degrigny, among others, has demonstrated that local electrochemical cleaning can work under properly controlled conditions (cathodic potential/voltage), using the proper equipment, and electrolytes. The aluminum foil method might have worked if the objects were not wrapped (traps the reaction products), and the proper electrolyte was used. If I heard correctly, glycerin was used as the electrolyte, but it is non-conducting, so it could not have worked.

44th Annual Meeting & 42nd Annual Conference – Book and Paper Session, May 16, “Paper Tapestry: Wallpaper Preservation” by Joanna P. McMann

Joanna McMann, Assistant Conservator at the Prince of Wales Northern Heritage Centre, was incredibly busy in Montreal, presenting two talks at the Book and Paper specialty session! This presentation outlined the work completed for the Spadina Museum in Toronto, Ontario. The historic house museum opened in 1984, and has been the subject of restoration treatment previously, as presented in the 2011 CAC-ACCR conference in Winnipeg: https://www.cac-accr.ca/files/pdf/e-cac-conference-2011.pdf (see page 20 for the abstract of “Wallpaper Reproduction Goes Digital”).

Photo of "Paper Tapestry: Wallpaper Preservation" presentation by Joanna P. McMann
Photo of servants’ hallway and wallpaper, from “Paper Tapestry: Wallpaper Preservation” by Joanna P. McMann.

 
The 1912-1913 third floor servants’ hallway had not been restored, and the floral-patterned wallpaper’s in situ stabilization was McMann’s goal. There were a number of condition issues including losses, abrasions, delamination of wallpaper from the wall, water staining, tearing, and significant soot, dust, and grime, resulting from the area being used as a storage space. The wallpaper’s paper substrate was pulpy and weak, and its media was water-soluble. McMann found that a modified technique of the full-scale digital printing previously used was necessary to complete the conservation project in the short timeframe of the month of December. There was 500 square feet of wallpaper requiring treatment, requiring a specific coding system to map the damage efficiently.
Surface cleaning was completed using goat-hair brushes and latex-free makeup sponges. The fragments were carefully cleaned, and cracks were cleaned with the makeup sponges and Absorene chemical absorbing sponges. McMann remarked on the effectiveness of this, allowing the cracks to recede into the overall aesthetic of the wall.
Delaminated wallpaper was re-adhered to the wall with a very dry wheat starch paste, gouges were pulp-filled, smoothed, and toned, and if necessary, damaged plaster was filled.
Losses were divided by size, so that medium – large losses were filled with the digitally printed reproduction papers, and small losses were filled with papers that were toned with watercolour. Using this coding system, more than 600 infills and 63 losses/abrasions were completed and treated! Three rounds of proofing were used to produce a quality output of the reproductive wallpaper paper, and the printed paper was split mechanically while damp as the reproduction paper was thick overall and chamfering was not possible. All fills were first done with toned Japanese tissue, in order to ensure a sympathetic colour if abrasions were to occur again, as the area will remain used as storage space after stabilization. The large losses required precise alignment before they were trimmed, and a combination of methyl cellulose and wheat starch paste was used to adhere and to allow for some slip during alignment.
Final toning was done using acrylics and a number of different light sources, to ensure compatibility to the viewer.
McMann presented the challenges and problem-solving techniques needed for the completion of the project to the very interested audience. She guided us through the stabilization of the servants’ area, noting its imortance to the Spadina (Spa-deenah or Spa-dinah depending on your class status in the nineteenth century!) Museum, as they have gained the title of being “Toronto’s Downton Abbey” and have exhibited costumes from the popular BBC drama.

21st Century Salary Agenda

For all of us who care about salaries in conservation and museums, here is a great post on the Art Museum Teaching blog. I missed it in Feb. because I was working in the field with little internet access, but just read it in my review of the 700+ emails that accumulated while I was gone. It’s worth it, especially for the re-posted salary agenda from authors on the Leadership Matters blog.
 
 

Mold is beautiful, but also very dangerous

According to Clare Voon,  writing about the “Beauty of Moldy Photos”  on the  Hyperallergic website on March 2, 2016,  Luce Lebart, Director of Collections at the National Library of France, has published a book titled “Mold is Beautiful” (Poursuite Editions, 2015) containing images of forgotten photographic glass plates which had been in a flood decades ago and developed all types of mold on their surfaces over the ensuing years. The images are strikingly beautiful. So beautiful that one can forget that mold is also very dangerous for photographic materials.

A must-see exhibit

During a quick visit to The Morgan Library and Museum yesterday, I entered the small exhibit, “Pierre-Jean Mariette and the Art of Collecting Drawings” (on display through May 1, 2016) expecting to see a number of wonderful drawings. While the drawings were wonderful, the exhibit was much more than that. It was an examination of the ways in which Mariette mounted, altered, restored, and displayed the drawings he acquired for his collection, and thus contained a number of examples of 18th century restorations. These, plus the accompanying video demonstrating how a single sheet of paper with drawings on both sides is separated (or split) into two sheets of paper each containing a single drawing, make it an exhibit that anyone interested in the history of conservation must see.

Treating Archaeological Copper Alloys on Site: A Survey on Current Practice

By Anna Serotta, Eve Mayberger, and Jessica Walthew

Selinunte, Sicily, 2015

 
New York University has been excavating at the site of Selinunte in southwestern Sicily for almost a decade (NYU Selinunte excavation website). During the 2015 field season, the conservation team conducted an informal survey on the treatment of metal objects in the field (Wiki page: Copper Alloy Treatment Survey (CATS) 2015). The survey was conducted because the Selinunte conservators were not satisfied by the results of their current treatment protocols for newly-excavated archaeological metals. Although all three conservators had worked at other archaeological sites, they all received the same graduate training and had similar approaches to field conservation treatment protocols.
The survey was broken into categories regarding several commonly used treatment methods:  cleaning, desalination, corrosion inhibitors, and coating, as well as issues of storage and re-treatment. Questions were distributed to a group of  archaeological field conservators known to the Selinunte conservation team via email. The following is a summary of the initial survey results.

  1. Scope of survey
  • There were 24 full responses from colleagues and input on individual questions from a handful of others.
  • Collectively, respondents have worked on approximately 50 different sites. The majority of these sites are in the Mediterranean, North Africa, or the Middle East (Greece, Cyprus, Italy, Turkey, Jordan, Israel, Egypt, Sudan, and Syria), but respondents have also worked in Pakistan, Mongolia, Peru, Panama, Chile, and on various sites in the Continental US. Almost all of these sites are terrestrial, although several respondents have worked on metals from underwater/shipwreck sites as well.
  • The condition of metals on all of these sites is of course extremely variable, but all respondents reported unstable copper alloys and bronze disease outbreaks on at least one of the sites on which they worked.
  1. Cleaning
  • Most respondents use predominantly (or exclusively) mechanical cleaning methods for corrosion reduction.
  • Respondents generally avoid wet cleaning, except for the use of ethanol and/or a mixture of ethanol and water in combination with mechanical cleaning.
  • Most respondents avoid any sort of chemical cleaning, although some mention doing so in the past.
  • A minority of respondents did report using one or more of the following chemical treatment methods (predominantly for coins): Rochelle salts, alkaline glycerol salts, EDTA, formic acid, ion-exchange resins, Calgon, electrochemical and/or electrolytic methods; these methods are generally followed up with rinsing and mechanical cleaning.
  1. Desalination
  • Most respondents do not soak their metals to remove soluble salts. This seems to have been a more common practice in previous years; several respondents mentioned discontinuing previously established soaking procedures on their sites.
  • Some respondents said that they only soak metals after chemical treatments to remove residues.
  • Several respondents questioned the efficacy of soaking to remove chlorides and mitigate bronze disease; since corrosion products like nantokite are not water-soluble, it is unknown what is actually being removed with soaking. In addition, there was some concern that soaking could actually have adverse effects on condition by exposing the metal to moisture and promoting chloride corrosion growth. The time-consuming nature of this treatment was also mentioned as a factor against its use. It can also be challenging to obtain enough deionized water for desalination.
  1.  Corrosion Inhibitors
  • Most respondents reported occasionally or regularly using benzotriazole (BTA) as a corrosion inhibitor.
  • Summary of BTA application protocols reported:
    • BTA is generally applied by immersion (whenever feasible)
    • Roughly half of the respondents who treated with BTA immersed in a vacuum desiccator. Availability of equipment and stability of the artifact were considered in deciding whether to immerse in a vacuum.
    • Those respondents who reported the specific concentration all used 3% in ethanol; one responder mentioned the use of a brush application of 10% BTA for particularly concerning chloride-driven corrosion
    • Immersion time varied considerably. Reported immersion times ranged from 15 minutes to several days.
      • Overnight, 12-24 hours, or 24 hours were the most commonly reported immersion times
      • Several respondents mentioned research supporting the optimal effectiveness of immersion for one hour
  • Several respondents have tried using 0.1M BTA + 0.01M AMT, as reported by Golfomitsou (ref 1); those who tried it generally did not notice much of a difference between this treatment and treatment with BTA alone
  • Additionally, a couple of respondents mentioned testing other corrosion inhibitors: e.g. cysteine, or carboxylic acid-based treatments (ref 2)
  • Several respondents only use corrosion inhibitors only when an object cannot be placed in a desiccated environment; otherwise, only preventive methods are used.
  • There were concerns raised regarding both the efficacy and the safety of BTA. (i.e. safety both during application and also safety concerns for people handling the artifacts). On one occasion concern was expressed about BTA interfering with future analysis.
  • The importance of rinsing in ethanol after treatment to remove excess BTA was mentioned. One respondent reported the development of a BTA-copper chloride complex within 24 hours.
  1.  Coating
  • Many respondents reported occasionally or regularly coating their copper alloy objects.
  • Paraloid B-48N was the most common material used, but many people also reported using Paraloid B-72, Paraloid B-44, and Incralac; there was one report of the use of cellulose nitrate.
  • When mentioned, factors influencing the choice of coating material included: availability, Tg, and whether or not solvent toxicity was a problem (pertaining to Incralac).
  • Many respondents did not indicate the method used for coated, but those who did generally reported coating by immersion; a couple of respondents reported two applications of the coating material.
  • Several respondents do not coat their metals and expressed some concern about the creation of microclimates under the coating film that would encourage further corrosion. A couple of respondents coat only in specific circumstances: when metals will be displayed or when consolidation is required.
  1. Storage
  • Over half of the respondents store metals in silica gel at some or all of the sites on which they work.
  • Several respondents used the RP system and Escal bags (ref 3) for long-term storage.
  • Most of the respondents who use silica gel recondition it annually. One respondent reported reconditioning based on indicator color change. A few respondents who use silica gel report having no annual access to metals after treatment.
  • A couple of the respondents who do not use silica gel or other desiccated storage reported environmental conditions that were dry enough not to warrant micro-climates.
  • Some respondents expressed apprehension about using silica gel when yearly access for reconditioning was not guaranteed; these respondents are concerned that housing with unconditioned silica gel will cause greater problems than housing without silica gel. One respondent suggested that reconditioning yearly may not even be enough.
  1. Re-Treatment
  • Over half of respondents were able to survey their metals to check stability. Some reported doing this regularly every year or every other year. Some respondents reported having too many metals for annual survey, so partial surveys were done, or more random checks, depending on time constraints and when metals are accessed by researchers.
  • Some respondents reported using silver oxide for treating bronze disease outbreaks; others reported using the same methods used for initial treatment. Several respondents questioned the efficacy of silver oxide and expressed concern about its implications for future analysis.

Our thanks to the respondents, who provided thoughtful responses to the proposed questions.  The 2015 Selinunte conservation team hopes to create and conduct a more detailed set of questions examining metal treatment protocols and distribute the survey to a wider audience (especially to conservators who completed their training outside the USA) in the near future. While we hope to expand the limited scope of this survey, it has nonetheless brought up some interesting points. There is no standard protocol for the treatment of archaeological copper alloys, and while the conservation literature is vast, there are still many unresolved questions.
Of course, there won’t be a one-shoe-fits-all treatment for archaeological bronzes, as the condition of the artifact, available resources (material resources, personnel resources, time constraints, etc), storage conditions, access, site policies, and local politics are all factors that influence treatment decisions. However, the survey revealed disagreement from practicing conservators on some of the principles integral to the general methodology: is soaking useful or harmful? Is treatment with corrosion inhibitors or coatings effective?
While there have been other recent projects compiling data on the treatment of copper alloy objects, more formalized follow-up research seems like a necessary next step. We welcome your thoughts on effective ways to move forward with this conversation and look forward to organizing a workshop session or discussion at upcoming professional meetings.
 
References:

  1. Golfomitsou, Stavroula  and John Merkel. “Understanding the efficiency of combined inhibitors for the treatment of corroded copper artefacts.” METAL 07 Proceedings of the Interim Meeting of the ICOM-CC Metal Working Group (5): 38-43.
  2. Gravgaard, M. and J. van Lanschot. 2012. “Cysteine as a non-toxic corrosion inhibitor for copper alloys in conservation.” Journal of the American Institute for Conservation 35 (1): 14-24. http://www.tandfonline.com/doi/abs/10.1080/19455224.2012.681618
  3. Mathias, C., K. Ramsdale, and D. Nixon. 2004. “Saving archaeological iron using the Revolutionary Preservation System.” Proceedings of Metal 2004, National Museum of Australia Canberra ACT, October, 4-8 2004: 28-42. http://www.nma.gov.au/__data/assets/pdf_file/0020/346034/NMA_metals_s1_p3_saving_archaeological.pdf

 
“This post is promoted by the AIC’s Archaeological Discussion Group (ADG).  For more information about ADG, please visit ADG’s webpage.” (http://www.conservation-us.org/specialty-groups/objects/archaeological-discussion-group )
 
Author Bios:
Anna Serotta is a Project Objects Conservator at the Brooklyn Museum. She received her Master’s Degree in Art History and an Advanced Certificate in Art Conservation at the Institute of Fine Arts, NYU, where she majored in objects conservation with a focus on archaeological materials. Prior to her work at the Brooklyn Museum, Anna held positions at the Metropolitan Museum of Art and the American Museum of Natural History, and she has worked as an archaeological field conservator on sites in Egypt, Turkey, Greece and Italy. Anna is a Fellow of the American Academy in Rome, a Professional Associate of the American Institute for Conservation, and also a lecturer for the Institute of Fine Arts Conservation Center.
Jessica Walthew is currently a Mellon Research Fellow at The Metropolitan Museum of Art in the Arts of Africa, Oceania and the Americas. She is a graduate of The Conservation Center, Institute of Fine Arts, NYU, specializing in archaeological and ethnographic conservation and has worked at Sardis, Turkey (Harvard-Cornell Expedition) and Selinunte (Institute of Fine Arts Excavations).
 

When will someone write that book?

When I hear about a new novel which features a restorer or conservator as a major character, I am always hopeful that it will be one in which the restorer/conservator neither solves mysteries nor is a thief or forger.  Unfortunately, “Unbecoming”, by Rebecca Scherm (Viking, 2015) is not that novel.
The main character, Grace, is a thief and forger as is her colleague, Hanna.  When they speak about restoration it is in the least complimentary of terms. Talking about her life after she was released from prison for forgery, Hanna says, “Well, I had to find something else I could do.  And restoration, as you know, is not so far from forgery. Except the work is half done for you.”   When Grace thinks about her work, she notes that as long as the clients “kept their valuables close, away from carbon dating and fluorescent spectroscopes, no one would be disappointed.”
Isn’t it time that someone write a novel that features a protagonist who is like the real life conservators we know?